How to Remove Permanent Marker in Metal With Non-solvent Method: If you want to remove the permanent magnetic field, which can be made by iron filings, from metal, you must first find a way to remove the static electric charge that is present on the metal’s surface.
There are two ways of doing this: One is by using an alkaline compound such as NaOH, and the other is by using an acidic compound like Acetone. The milder method is used if there are no other options available.
Step 1: Use Damp Cloth and Rubbing Alcohol to Find the Permanent Ink. The first step is to clean the piece of metal with rubbing alcohol or tap water, to remove all of the moisture, and any loose or damaged paint. Then, apply a small amount of non-solvent dry erase markers.
Do this in random patterns, or as a straight row if you have a permanent inkjet printer. If using a dry ink marker, remember to always start with a dry cloth, and once your permanent ink has dried, use good quality wet wipes or paper towels to prevent damage to the surface.
Step 2: Using Damp Wipes Or Paper Towels, Clean the Metal Furniture. The second step is to rub or wash any spilled ink, permanent ink, or marking compound, with a mild household item and disinfectant.
Make sure to disinfect everything; you do not want any residual residue left on the piece of metal furniture, as it will cause rust. Also, be sure to dry the surface with a soft cotton cloth. Be sure not to let any residue remain on any type of fabric, including leather or plastic.
Step 3: The third step, and probably the most important, is to wipe away any dust or debris with a household item, preferably a dry towel. Do not allow the dust or dirt to become airborne, as it can create a hazard for anyone who might come into contact with it while trying to complete their task.
To remove permanent ink, the cloth should be dipped in an alcohol or anthrea cleaning solution. Use the softest of household cleaners, and be sure to thoroughly rinse off any alcohol residue that remains.
Step 4: Once you’ve finished rinsing off the area with the household cleaner, it’s time to move to apply the actual mark eraser, or dry erase markers, to your metal surfaces.
You can either spray the product onto the surface with a rag or brush or roll it out with a sponge. Either way, always apply the product evenly. It’s also a good idea to use the same amount of product on each piece of metal that you are trying to mark so that you don’t create an excessive mess.
Step 5: The fifth and final step in removing permanent ink is to carefully wipe away any excess product with a dry cloth. Wipe the cloth in a circular motion, going around the piece of metal that you are applying the product to. This will ensure that you get the evenest coverage possible and will prevent any streaks or dots from appearing. If there is any remaining residue after these five simple steps, it’s time to move onto purchasing some alcohol or anthrea cleaning agents.
The final step is to wipe down the metal with a clean dry cloth, again using the same amount of product as previously stated. This final step will help you remove the ink and will make your metal look brand new once again. Before moving on to other household items, take a short walk around your neighborhood to get some fresh air.
The reason for this is that air pollution can cause permanent ink to appear on your metals and walking around your neighborhood will help to refresh your spirit. If at all possible, do not allow the stain to soak into the metal. Do not attempt to sand the area down, as the acid will eat away at the metal over time.